equipo de prueba de la descarga de la carga de la batería de 100V 150A con la función de Energía-Retroalimentación

NO

Artículo

Requisito de función

1

Canal

1

2

Modo de acción

Completamente independiente

3

Modo de trabajo del canal principal

Carga: carga de corriente constante y voltaje constante CCCV. &CC

Descarga: CD de descarga de corriente constante. y CP

Descansando, parando

Condición de aborto de prueba del canal principal

Tiempo, voltaje, corriente, capacidad, etc.

4

Voltaje del canal principal

Rango de voltaje de carga y descarga

 10V -100V

Exactitud

± ( 0,1%RD+0,1%FS )

Resolución

1mV

Corriente del canal principal.

Corriente máxima de salida

150A

Corriente de salida mínima

100mA​

Exactitud

± ( 0,1%RD+0,1%FS )

Resolución

1mA

Fuerza

Producción

Potencia máxima funcionamiento continuo monocanal 15 KW

Función de corte de parámetros del canal auxiliar

El paso del canal principal se puede configurar para que se detenga o cambie cuando la señal del canal auxiliar alcance ciertas condiciones.

5

programa de control

Support for power-down data protection, support for power outages, manual stopping and succession of tests from data files.

Safety protection conditions can be set, including: lower voltage limit, upper voltage limit, lower current limit, upper current limit, voltage and current trend。

Auxiliary channel protection conditions can be set and parameters can be set including: upper voltage limit, lower voltage limit, upper temperature limit and lower temperature limit.

Cycle times

Max 9999

Work step time unit

h、min、s are available

Data logging

Min 5S

6

Data display method

Loop List

cycle number, charge/discharge capacity, charge/discharge efficiency, charge/discharge energy, charge/discharge average voltage, etc.

Process List

process serial number, operation mode, process time, capacity, energy, median voltage, termination voltage, termination current, etc.

Detailed list

There are record serial number, system time, accumulated time, voltage, current, energy, power, etc.

7

Data export method

The data can be exported to EXCEL and chart files, which can provide a variety of data analysis curves such as charging and discharging efficiency, charging and discharging curves, voltage, capacity, current time characteristics, etc., and the curves can be imported into EXCEL.

8

Curve Type

X coordinate: total time, charging and discharging capacity, cycle times, etc., can be set freely.

Y coordinate: total voltage, current, capacity, single body temperature, charge/discharge capacity, single body voltage, etc., can be set freely.

9

Software protection

Power-down data protection, power-off pause renewal, over-voltage and over-discharge protection, over-current and under-current protection, capacity protection, over-temperature protection, abnormal current fluctuation protection, abnormal charging voltage rise rate protection, abnormal discharge voltage fall rate protection.

Hardware protection

Battery reversal, over-current protection, over-voltage protection, short-circuit protection.

Alarm function

The hardware has functions such as emergency cut-off switch, automatic shutdown after power failure, and automatic load connection and disconnection.

10

Output wire

Four-wire connection mode with separate current and voltage lines.

11

Maintainability

Modular structure, available spare parts, spare parts for timely replacement, repair, free of charge during the warranty period.

12

Test channel and battery pack connection method

Alligator clamp

13

Equipment testing environment and technical requirements

Single cabinet requires 30KW 380V three-phase four-wire power configuration, ventilation and dry plant

Working environment: temperature -10℃～40℃ / humidity: 10%～90%